How to use the hole plate of the mobile tool car rationally

In the design of mobile tool car, cavity plate is a very practical component. The rational use of the hole plate can greatly improve the efficiency of the tool car storage and work convenience.

First, the tool classification suspension
Hand tool suspension
For tools such as screwdrivers, the handle can be partially inserted into the hole in the hole plate depending on its size and type. For example, hang a flat-head screwdriver and a Phillips screwdriver in separate rows to quickly find the right tool when needed. The small wrench can also be hung on the hole plate through the hook and arranged according to the size of the specification, so that the required wrench can be quickly located in the maintenance work and improve the work efficiency.

Pliers are another commonly used hand tool, and hanging them head down from the hole board not only saves space, but also makes the make and model of pliers visible. Pliers with different functions, such as needle-nose pliers, flat pliers, etc., are placed in different areas for easy differentiation and access.

Power tool accessories hanging
The drill bit of an electric drill is an accessory that is easily lost and needs to be replaced frequently. Using the hole plate, different sizes of drill bits can be hung neatly. The drill bit can be secured by elastic clips, each inserted with a hole hole, so that the drill bit is suspended vertically, preventing it from colliding with each other and damaging it.

The head of the electric screwdriver can also be suspended in a similar manner. According to the shape of the batch head (such as cross, word, hex, etc.), the classification is then hung in different areas of the hole plate. In this way, when the batch head needs to be replaced, the right model can be found quickly and accurately.

2. Material storage
Small parts storage
Screws, nuts, washers and other small parts are indispensable in maintenance and assembly work, but they are small and easy to lose. A plastic box with small compartments can be used, and the back of the box can be fixed to the hole plate by screws or hooks. Each compartment stores a specification of small parts, such as M3, M4, M5 screws are placed in different compartments, and the box is labeled to indicate the specification and quantity of the parts, which is convenient to find and manage.
For some scattered electronic components, such as resistors, capacitors, etc., the same method can also be used. The components are classified and stored according to parameters such as resistance value or capacity using transparent plastic compartments, which is easy to obtain the required components quickly when the electronic equipment is repaired or manufactured.

Consumables storage
Consumables such as glue sticks and tape are often used in work. The glue stick can be fixed to the hole plate through a special clamp, one end of the clamp is inserted into the hole of the hole plate, so that the glue stick can be suspended vertically. For tape, you can use a hook with a cross bar, the tape roll over the cross bar, so that the tape can be freely turned, easy to remove the tape when needed.
Wires, cables, etc., can also be reasonably stored on the hole plate. After the wire is rolled to a suitable length, tie it with string or elastic tape, and then hang it on the hook of the hole board. Wires of different specifications and colors are stored separately to facilitate the selection of suitable wires in circuit connection and other work.

Third, personalized customization
Tool identification and layout
Layout the tools and materials on the cave board according to the workflow and personal habits. For example, if woodworking and metalworking work is done regularly, you can place woodworking tools on one side of the hole board and metalworking tools on the other side. In addition, you can use a color label or marker pen to mark the name and purpose of the tool around the hole of the hole board or the tool hanging position, so that the position of the tool is more clear.

Add AIDS
A small LED light strip is installed on the cave board to facilitate finding tools in low light working environments. The light strip can be attached to the edge of the hole plate via a clip or magnetic base, and can be powered by a battery or USB interface.
It is also possible to add a small tool list board to the hole board, and use a whiteboard to record the loan and return of tools, or record the tools and materials that need to be supplemented, so as to facilitate the management of the tool car.
Through the rational use of the above various ways, the hole plate on the mobile tool truck can play the maximum function, so that the storage of tools and materials is more orderly, and the working process is more efficient and convenient.